Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO(PPE)+TPE NORYL™ WCA901 resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
Shore hardness | 邵氏A,30秒 | ASTM D2240 | 91 |
film | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
Tear resistance of pants | ISO 6383-1 | 13.0 N/mm |
Electrical performance | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
Volume resistivity | ASTM D257 | 5.1E+15 ohms·cm | |
Surface Resistivity | ASTM D257 | 4.2E+16 ohms | |
relative permittivity | 1MHz | IEC 60250 | 2.70 |
Dissipation Factor | 1MHz | IEC 60250 | 4E-03 |
Mechanical properties | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
elongation | 断裂2 | ASTM D638 | 110 % |
断裂,136°C3 | UL 1581 | 130 % | |
断裂 | UL 1581 | 190 % | |
Flexural modulus | 100mmSpan | ASTM D790 | 390 MPa |
tensile strength | 断裂,136°C3 | UL 1581 | 27.0 MPa |
Flexural modulus | ISO 178 | 390 MPa | |
Tensile strain | 断裂 | ISO 527-2/50 | 95 % |
tensile strength | 断裂 | UL 1581 | 26.0 MPa |
断裂2 | ASTM D638 | 23.0 MPa | |
断裂 | ISO 527-2/50 | 22.0 MPa |
flammability | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 850 °C |
VW | UL 1581 | Pass | |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 775 °C |
UL flame retardant rating | 6.0mm | UL 94 | V-0 |
Limiting Oxygen Index | ISO 4589-2 | 27 % |
physical property | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
density | ASTM D792 | 1.10 g/cm³ | |
melt mass-flow rate | 250°C/10.0kg | ASTM D1238 | 10 g/10min |
Thermal performance | Test Condition | Test Method | SABIC/NORYL™ WCA901 resin |
---|---|---|---|
Heat distortion temperature | 121°C | UL 1581 | 15 % |
brittle temperature | ASTM D746 | <-40.0 °C | |
UL temperature rating | UL 1581 | 105 °C |
Contact Us
Get App
Top