Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Polyolefin, Unspecified CALP 5VAP140-2 Lion Idemitsu Composites Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 3.10 kJ/m² |
| hardness | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 99 |
| Mechanical properties | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 12 % |
| tensile strength | ASTM D638 | 31.0 MPa | |
| Flexural modulus | ASTM D790 | 3910 MPa | |
| bending strength | ASTM D790 | 52.0 MPa |
| flammability | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| UL flame retardant rating | 2.0mm | UL 94 | 5VA |
| 0.8mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| Shrinkage rate | TD:2.00mm | 内部方法 | 1.2 % |
| density | ASTM D792 | 1.34 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 6.6 g/10min | |
| Shrinkage rate | MD:2.00mm | 内部方法 | 1.2 % |
| Thermal performance | Test Condition | Test Method | Lion Idemitsu Composites Co., Ltd./CALP 5VAP140-2 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 141 °C |
| RTI Imp | UL 746 | 65.0 °C | |
| RTI | UL 746 | 65.0 °C | |
| RTI Elec | UL 746 | 65.0 °C |
Contact Us
Get App
Top