Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 EPR24 HENAN SHENMA NYLON
--
Thin walled products,Base material for molding thin or large surface ar
Low viscosity,With light,Low viscosity products
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | HENAN SHENMA NYLON/EPR24 |
|---|---|---|---|
| Hot deformation temperature | 1.80Mpa | ISO 75 | 70 °C |
| Linear coefficient of thermal expansion | Dry | ASTM D696 | 7.5 10-5k |
| Melting temperature | Dry | ISO 3146 | 230-252 °C |
| UL flame retardant rating | UL 94 | V-2 |
| mechanical properties | Test Condition | Test Method | HENAN SHENMA NYLON/EPR24 |
|---|---|---|---|
| Bending modulus | Dry | ISO 178 | 1.4 GPa |
| bending strength | Dry | ISO 178 | 58.5 Mpa |
| Charpy Notched Impact Strength | Dry | ISO 179/1eA | 6.0 kJ/m² |
| Dry | ISO 179/1eU | 不断 kJ/m² | |
| Elongation at Break | Dry | ISO 527 | 17.0 % |
| Impact strength of cantilever beam gap | Dry | ISO 180/1A | 5.1 kJ/m² |
| Tensile modulus | Dry | ISO 527 | 1.6 GPa |
| tensile strength | Dry | ISO 527 | 75.7 Mpa |
| other | Test Condition | Test Method | HENAN SHENMA NYLON/EPR24 |
|---|---|---|---|
| characteristic | 有光、低粘度产品 | ||
| purpose | 用于模制薄型制品或大表面积制品的基料 |
| Physical properties | Test Condition | Test Method | HENAN SHENMA NYLON/EPR24 |
|---|---|---|---|
| Impurities and color particles | Dry | QB | ≤0.017 % |
| melt mass-flow rate | Dry | ISO 1133 | 12.4 g/10min |
| Relative viscosity | 溶解 | QB | 2.37±0.03 |
| water content | Dry | GB12006.2-89 | ≤2000 ppm |