Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 LV-30H FWA EMS-CHEMIE SWITZERLAND
Grilamid®
Electrical applications、Shell、Lighting applications、Laptop case、Consumer product applicat、Vehicle electronics、Electrical/Electronic App、Application in the automo、Electrical appliances、Industrial applications
Low temperature impact re、gas barrier 、Filler: Glass fiber reinf、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | kJ/m² | 35 |
| 23°C | kJ/m² | 35 |
| hardness | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| ball-indentation hardness | MPa | 170 145 |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | V | -- | |
| Surface Resistivity | ohms | -- | |
| dielectric strength | kV/mm | 44 43 | |
| Volume resistivity | ohms·cm | 1E+11 |
| Mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| Tensile strain | 断裂 | % | 2.5 2.5 |
| Tensile modulus | MPa | 10000 9000 | |
| tensile strength | 断裂 | MPa | 95.0 75.0 |
| flammability | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| Flammability level | 0.40mm | V-0 -- |
| physical property | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| Shrinkage rate | MD | % | 0.10 -- |
| Water absorption rate | 饱和,23°C | % | 1.4 -- |
| Shrinkage rate | TD | % | 0.70 -- |
| Water absorption rate | 平衡,23°C,50%RH | % | 0.60 -- |
| Thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-30H FWA |
|---|---|---|---|
| melting temperature | °C | 178 -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 2E-05 -- |
| Continuous use temperature | °C | 90.0to120 -- | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 160 -- |
| 8.0MPa,未退火，HDT | °C | 105 -- | |
| Linear coefficient of thermal expansion | TD | cm/cm/°C | 9E-05 -- |
Contact Us
Get App
Top