Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

Ethylene Copolymer Halar® 1400LC SOLVAY BELGIUM

Plastic Datasheets

	Test Condition	Test Method	SOLVAY BELGIUM/Halar® 1400LC
Rockwell hardness	R级	ASTM D785	73
Heat distortion temperature	0.45MPa,未退火，HDT	ASTM D648	109 °C
Shore hardness	邵氏D	ASTM D2240	69
coefficient of friction	与自身-动态	ASTM D1894	0.20
elongation	断裂,23°C	ASTM D638	1.0to10 %
coefficient of friction	泰伯耐磨性(1000Cycles,500g,CS-17转轮)	ASTM D1894	5.00 mg
Fusion temperature		ASTM D3418	42.0 J/g
specific heat	23°C	ASTM D3418	962 J/kg/°C
density		ASTM D792	1.68 g/cm³
Tensile modulus	23°C	ASTM D638	1780 MPa
tensile strength	断裂,23°C	ASTM D638	19.0to29.0 MPa
Flexural modulus	23°C	ASTM D790	1690 MPa
Impact strength of cantilever beam gap	-40°C,3.20mm	ASTM D256	19 J/m
Heat distortion temperature	1.8MPa,未退火，HDT	ASTM D648	68.0 °C
tensile strength	屈服,23°C	ASTM D638	30.0 MPa
Crystallization peak temperature	DSC	ASTM D3418	222 °C
Limiting Oxygen Index		ASTM D2863	52 %
dielectric strength	23°C,3.20mm	ASTM D149	14 kV/mm
brittle temperature		ASTM D746A	20.0 °C
coefficient of friction	与自身-静态	ASTM D1894	0.20
melting temperature		ASTM D3418	234 °C
dielectric constant	23°C,1MHz	ASTM D150	2.57
Shrinkage rate	MD	ASTM D955	2.5 %
Crystallization peak temperature		ASTM D3418	40.0 J/g
elongation	屈服,23°C	ASTM D638	1.0to10 %
bending strength	23°C	ASTM D790	45.0to47.0 MPa
Volume resistivity	23°C	ASTM D257	5.5E+16 ohms·cm
melt mass-flow rate	275°C/2.16kg	ASTM D1238	450to600 g/10min
Linear coefficient of thermal expansion	MD	ASTM D696	1E-04 cm/cm/°C
Impact strength of cantilever beam gap	23°C,3.20mm	ASTM D256	25 J/m
UL flame retardant rating		UL 94	V-0
Water absorption rate	平衡	ASTM D570	<0.10 %
thermal stability		TGA	300 °C
Glass Transition Temperature		DMA	85.0 °C
thermal conductivity	40°C	ASTMC177	0.15 W/m/K

Get App

Top