Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS ELIX™ ABS E211 LNS013 ELIX Polymers, S. L.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
Charpy Notched Impact Strength23°CISO 179/1eA20 kJ/m²
-30°CISO 179/1eA10 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/1A9.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU150 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A20 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU80 kJ/m²
hardnessTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
ball-indentation hardnessISO 2039-1105 MPa
Electrical performanceTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
Volume resistivityIEC 600931E+16 ohms·cm
dielectric strength23°C,1.00mmIEC 60243-135 kV/mm
relative permittivity23°C,1MHzIEC 602502.90
23°C,100HzIEC 602503.10
Compared to the Leakage Tracking Index (CTI)解决方案AIEC 60112PLC 0
Surface ResistivityIEC 600931E+16 ohms
Dissipation Factor23°C,100HzIEC 602505E-03
23°C,1MHzIEC 602509E-03
Mechanical propertiesTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
tensile strength 屈服,23°CISO 527-2/5045.0 MPa
Flexural modulus23°CISO 1782400 MPa
Tensile strain屈服,23°CISO 527-2/502.7 %
断裂,23°CISO 527-2/50>15 %
Tensile modulus23°CISO 527-2/12500 MPa
bending strength23°CISO 17873.0 MPa
flammabilityTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
burning rate2.00mmISO 379555 mm/min
Burning wire flammability index2.0mmIEC 60695-2-12700 °C
physical property Test ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
Melt volume flow rate220°C/10.0kgISO 11336.00 cm³/10min
Shrinkage rateTDISO 294-40.50to0.80 %
MDISO 294-40.50to0.80 %
Thermal performanceTest ConditionTest MethodELIX Polymers, S. L./ELIX™ ABS E211 LNS013
Linear coefficient of thermal expansionMD:23到55°CISO 11359-28E-05 cm/cm/°C
Heat distortion temperature1.8MPa,退火,HDTISO 75-2/A101 °C
vicatISO 306/B50108 °C
Heat distortion temperature0.45MPa,退火,HDTISO 75-2/B107 °C

Contact Us

Get App

Top