Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Polyolefin, Unspecified GFR/350 SOLVAY BELGIUM
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Shore hardness | 邵氏D | ISO 868 | 38 |
Electrical performance | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Volume resistivity | 20°C | IEC 60502 | 6.7E+14 ohms·cm |
dielectric constant | 20°C | IEC 60502 | 2500 Mohms·km |
Volume resistivity | 90°C | IEC 60502 | 5.4E+13 ohms·cm |
dielectric constant | 90°C | IEC 60502 | 200 Mohms·km |
Mechanical properties | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
elongation | 断裂 | IEC 60811 | 210 % |
tensile strength | 断裂 | IEC 60811 | 12.3 MPa |
flammability | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Corrosion of flue gas | 传导率 | IEC 60754-2 | <10.0 µS/mm |
Discharge of halogenated acids | IEC 60754-1 | <0.10 % | |
Temperature index (combustion) | NES715 | 300 °C | |
Limiting Oxygen Index | ASTM D2863 | 38 % | |
Potential heat energy - high level (total value) | ISO 1716 | 18.6 MJ/kg | |
Corrosion of flue gas | pH值 | IEC 60754-2 | >4.30 |
physical property | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Environmental stress cracking resistance | 条件A,50°C,3.00mm,10%Igepal,模压成型 | ASTM D1693 | >1000 hr |
melt mass-flow rate | 190°C/21.6kg | 内部方法 | 3.5 g/10min |
density | ASTM D792 | 1.40 g/cm³ | |
Water absorption rate | 100°C | IEC 60811 | <4.00 mg/cm² |
aging | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Changes in mechanical properties after hot air aging test | 拉伸强度变化 | IEC 60811 | 10 % |
拉伸伸长率变化 | IEC 60811 | -5 % |
Thermal performance | Test Condition | Test Method | SOLVAY BELGIUM/GFR/350 |
---|---|---|---|
Hot pressing test - maximum permeability, K | 100°C | IEC 60811 | <50 % |
impact test | -15°C | IEC 60811 | 无开裂 |
thermosetting | 250°C,负荷断裂伸长率 | IEC 60811 | 50 % |
Flexural modulus | -15°C | IEC 60811 | 无开裂 |
Hot air contraction | 100°C | IEC 60811 | <4.0 % |
thermosetting | 250°C,冷却后最大永久伸长率 | IEC 60811 | 0.0 % |
Contact Us
Get App
Top