Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP S135 VF2001 JAPAN POLYPLASTIC
LAPEROS®
Household appliances,Household appliances,Automotive sector,Electrical field,Electronic field,Switch panel,Engine hood parts,Laptop case
Glass fiber reinforced,High rigidity,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 267 °C |
1.8MPa,Unannealed | ISO 75-2/A | 340 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 2.3E-05 cm/cm/°C |
MD | ISO 11359-2 | 1E-06 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 350 °C |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 14500 Mpa |
bending strength | 23°C | ISO 178 | 230 Mpa |
CompressiveStress | 1%Strain | ISO 604 | 114 Mpa |
Fracture bending strain | ISO 178 | 2.0 % | |
Tensile modulus | ISO 527-2/1A/1 | 15500 Mpa | |
Tensile strain | Break | ISO 527-2/1A/5 | 1.3 % |
tensile strength | Break | ISO 527-2/1A/5 | 140 Mpa |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
Dielectric strength | IEC 60243-1 | 37 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 9E-03 |
Relative permittivity | 1MHz | IEC 60250 | 3.50 |
Surface resistivity | IEC 60093 | 1E+17 ohms | |
Volume resistivity | IEC 60093 | 1E+17 ohms·cm |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.10 % |
TD | ISO 294-4 | 0.40 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 7E-03 % |
Saturation,23°C | ISO 62 | 4E-03 % |
impact performance | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 14 kJ/m² |
flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/S135 VF2001 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |