Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 4501-112 SABIC INNOVATIVE US
LEXAN™
Electrical applications、Lighting applications、Automotive Applications
Thermal stability、Middle flow
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D1822 | 578 kJ/m² | |
| Dart impact | 23°C | ASTM D3029 | 149 J |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| Rockwell hardness | M计秤 | ASTM D785 | 85 |
| R计秤 | ASTM D785 | 122 |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| Dissipation Factor | 50Hz | ASTM D150 | 1.2E-03 |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 3 |
| Dissipation Factor | 60Hz | ASTM D150 | 1.2E-03 |
| dielectric constant | 60Hz | ASTM D150 | 3.15 |
| Volume resistivity | ASTM D257 | >2.6E+16 ohms·cm | |
| dielectric constant | 50Hz | ASTM D150 | 3.15 |
| Dissipation Factor | 100Hz | ASTM D150 | 0.024 |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 4 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 2 |
| dielectric constant | 1MHz | ASTM D150 | 3.00 |
| dielectric strength | 3.20mm,inAir | ASTM D149 | 20 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 3 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 120 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 95.1 Mpa |
| tensile strength | 断裂 | ASTM D638 | 71.7 Mpa |
| 屈服 | ASTM D638 | 65.5 Mpa | |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 2030 Mpa |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| Haze ratio | 2540µm | ASTM D1003 | 1.0 % |
| refractive index | ASTM D542 | 1.600 | |
| transmissivity | 2540µm | ASTM D1003 | 85.0 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.70-0.80 % |
| Water absorption rate | 24hr | ASTM D570 | 0.16 % |
| Specific volume | ASTM D792 | 0.835 cm³/g | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 3.0 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/4501-112 |
|---|---|---|---|
| thermal conductivity | ASTMC177 | 0.21 W/m/K | |
| Linear coefficient of thermal expansion | MD：-40到95°C | ASTME831 | 9.2E-05 cm/cm/°C |
| RTI Imp | UL 746 | 125 °C | |
| RTI Str | UL 746 | 125 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 143 °C |
| specific heat | ASTMC351 | 1260 J/kg/°C | |
| RTI Elec | UL 746 | 125 °C |
Contact Us
Get App
Top