Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PCTA MN610 EASTMAN USA
DuraStar™
food、chip
High mobility、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | EASTMAN USA/MN610 |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 103 M（Scale） |
| Mechanical properties | Test Condition | Test Method | EASTMAN USA/MN610 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 80 J/m |
| bending strength | 23°C | ASTM D790 | 69 Mpa |
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 40 J/m |
| elongation at break | 23°C | ASTM D638 | 300 % |
| Flexural modulus | 23°C | ASTM D790 | 2000 Mpa |
| Suspended wall beam without notch impact strength | 仪表落镖冲击 | ASTM D3763 | 425 ft.lb |
| tensile strength | 23°C | ASTM D638 | 51 Mpa |
| Suspended wall beam without notch impact strength | 23/-40°C | ASTM D4812 | NB J/m |
| optical performance | Test Condition | Test Method | EASTMAN USA/MN610 |
|---|---|---|---|
| transmittance | μm | ASTM D1003 | 89-91 % |
| Haze ratio | ASTM D1003 | 0.30 % |
| physical property | Test Condition | Test Method | EASTMAN USA/MN610 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D995 | 0.2 % |
| TD | ASTM D995 | 0.6 % |
| Thermal performance | Test Condition | Test Method | EASTMAN USA/MN610 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa未退火，HDT | ASTM D648 | 65 °C |
| 0.45MPa未退火，HDT | ASTM D648 | 74 °C |
Contact Us
Get App
Top