Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP HP5105R OPP OMAN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | OPP OMAN/HP5105R |
---|---|---|---|
Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 85 °C |
mechanical properties | Test Condition | Test Method | OPP OMAN/HP5105R |
---|---|---|---|
crack | 拉伸Strain | > 50 % | |
Tensile modulus | ISO 527-1/1 | 1500 Mpa | |
Tensile strain | Yield | 8 % | |
Break | > 50 % | ||
tensile strength | Yield | ISO 527-2/50 | 35 Mpa |
yield | 拉伸应力 | ISO 527-2/50 | 35 Mpa |
拉伸Strain | 8 % |
Physical properties | Test Condition | Test Method | OPP OMAN/HP5105R |
---|---|---|---|
230°C/2.16 kg | 熔流率(熔体Flow速率) | ISO 1133 | 24 g/10 min |
melt mass-flow rate | 230°C/2.16 kg | ISO 1133 | 24 g/10 min |
impact performance | Test Condition | Test Method | OPP OMAN/HP5105R |
---|---|---|---|
23°C | 简支梁Unnotched冲击强度 | ISO 179/1eU | 110 kJ/m² |
简支梁Notched冲击强度 | ISO 179/1eA | 2.5 kJ/m² | |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 110 kJ/m² |
squeeze out | Test Condition | Test Method | OPP OMAN/HP5105R |
---|---|---|---|
Temperature in Zone 1 of the material cylinder | 210 to 240 °C | ||
Temperature in Zone 2 of the material cylinder | 210 to 240 °C | ||
Temperature in Zone 3 of the material cylinder | 210 to 240 °C | ||
Temperature in Zone 4 of the material cylinder | 210 to 240 °C |