Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6/6T KR4340G6 BASF GERMANY
Ultramid®
Electronic and Electrical、Automotive components
Low water absorption、Rigidity and strength
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 65 kJ/m² |
| -30°C | ISO 179/1eU | 65 kJ/m² |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 11000 Mpa | |
| bending strength | ISO 178 | 240 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 2.5 % |
| Flexural modulus | ISO 178 | 11000 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 150 Mpa |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| Dissipation Factor | 1 MHz | IEC 60250 | 0.015 |
| Compared to the Leakage Tracking Index (CTI) | 解决方案 A | IEC 60112 | V |
| Volume resistivity | IEC 60093 | 1.0E+17 ohms·cm | |
| relative permittivity | 1 MHz | IEC 60250 | 3.90 |
| Surface Resistivity | IEC 60093 | -- ohms |
| flammability | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| Hot filament ignition temperature | 0.40 mm | IEC 60695-2-13 | 775 °C |
| Limiting Oxygen Index | ISO 4589-2 | 50 % | |
| Polymer Abbreviation | PA6T/6-GF30 FR | ||
| Burning wire flammability index | 0.40 mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| Apparent density | 0.70 g/cm³ | ||
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.4 to 1.8 % |
| viscosity number | 96% H2SO4 | ISO 307 | 120 cm³/g |
| Mold Shrinkage - Model Heating | 1.50 mm | 0.10 % | |
| Melt volume flow rate | 325°C/5.0 kg | ISO 1133 | 45.0 cm3/10min |
| Shrinkage rate | 流量 | ISO 294-4 | 0.30 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 4.3 to 5.3 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 0.70 % |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 290 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 220 °C |
| injection | Test Condition | Test Method | BASF GERMANY/KR4340G6 |
|---|---|---|---|
| drying time | 8.0 hr | ||
| Suggested maximum moisture content | 0.030 % | ||
| Temperature in the middle of the barrel | 310 °C | ||
| Temperature at the rear of the barrel | 300 °C | ||
| Processing (melt) temperature | 310 to 330 °C | ||
| Hopper temperature | 80 °C | ||
| drying temperature | 110 °C | ||
| Temperature at the front of the material cylinder | 320 °C | ||
| screw speed | < 18 m/min | ||
| Temperature | 80 to 120 °C | ||
| Spray nozzle temperature | 320 °C | ||
| Residence Time | < 5.0 min |
Contact Us
Get App
Top