Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT 1494X02 TORAY JAPAN

Toraycon®

Automotive sector,Electronic field,Electrical field

Flame retardant

Plastic Datasheets

hardness	Test Condition	Test Method	TORAY JAPAN/1494X02
Rockwell hardness		ISO 2039-2	82 M（Scale）

Basic Performance	Test Condition	Test Method	TORAY JAPAN/1494X02
Water absorption rate	23℃·24hr	ASTM D-570	0.08 %

thermal performance	Test Condition	Test Method	TORAY JAPAN/1494X02
Combustibility (rate)		UL 94	V-0
Hot deformation temperature	0.45MPaUnannealed	ISO 75-2/Bf	136 °C
Hot deformation temperature		1.80MPaAnnealed	ISO 75-2/Af	64.0 °C
Linear coefficient of thermal expansion		ASTM D-696	9.0 cm/cm℃×10
			ASTM D696/ISO 11359	9.0x10^-5 mm/mm.℃
		MD	ISO 11359-2	9E-05 cm/cm/°C

mechanical properties	Test Condition	Test Method	TORAY JAPAN/1494X02
Bending modulus	23℃	ASTM D-790	28 kg/cm
		23°C	ISO 178	2900 Mpa
			ASTM D790/ISO 178	2800 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	95 kg/cm²(MPa)[Lb/in²]
		23°C	ISO 178	105 Mpa
		23℃	ASTM D-790	940 kg/cm
Charpy Notched Impact Strength	23°C	ISO 179/1eA	2.5 kJ/m²
compressive strength	23℃	ASTM D-695	930 kg/cm
Elongation at Break		ASTM D638/ISO 527	20 %
		23°C	ISO 527-2	8.0 %
		23℃	ASTM D-638	20 %
Impact strength of cantilever beam gap	Notched，-40℃	ASTM D-256	3.0 kg·cm/cm
		Notched，23℃	ASTM D-256	3.5 kg·cm/cm
		Unnotched，-40℃	ASTM D-256	50 kg·cm/cm
		Unnotched，23℃	ASTM D-256	120 kg·cm/cm
			ASTM D256/ISO 179	35 kg·cm/cm(J/M)ft·lb/in
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	66 kJ/m²
Rockwell hardness		ASTM D785	M86
Rockwell hardness			ASTM D-785	119
Tensile modulus	23°C	ISO 527-2	3000 Mpa
tensile strength		ASTM D638/ISO 527	65 kg/cm²(MPa)[Lb/in²]
		23℃	ASTM D-638	620 kg/cm
		23°C	ISO 527-2	64.0 Mpa

Electrical performance	Test Condition	Test Method	TORAY JAPAN/1494X02
Arc resistance		ASTM D-495	70 秒
Dielectric constant		ASTM D150/IEC 60250	3.4
Dielectric constant		23°C	IEC 60250	3.40 1MHz
Dielectric strength		IEC 60243-1	26 KV/mm
Dielectric strength		短时·23℃·1/8时	ASTM D-149	17 KV/mm
Dissipation factor	耐电弧性	IEC 61621	70.0 S
Dissipation factor		23°C	IEC 60250	0.020 1MHz
Volume resistivity		ASTM D-257	1.0 cm×10
			ASTM D257/IEC 60093	1.0x10^14 Ω.cm
			IEC 60093	2E+16 Ω.cm

other	Test Condition	Test Method	TORAY JAPAN/1494X02
characteristic			非增强阻燃等级.V-0

Physical properties	Test Condition	Test Method	TORAY JAPAN/1494X02
density		ASTM D792/ISO 1183	1.43
Friction coefficient	本身	ASTM D-1894	0.18
Friction coefficient		金属	ASTM D-1894	0.14
Hot deformation temperature	18.6kg/cm	ASTM D-648	60 °C
Hot deformation temperature		4.6kg/cm	ASTM D-648	165 °C
Shrinkage rate	MD	ISO 294-4	1.5 %
		80×80×3板材		1.5-2.0 %
		TD	ISO 294-4	2.0 %
Taber abraser	1.000g·CS-17轮	ASTM D-1044	13 毫克/1.000m
Water absorption rate	(23°C,24hr)	ISO 62	0.080 %
Water absorption rate			ASTM D570/ISO 62	0.08 %

Get App

Top