Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 CM1016G-30 TORAY JAPAN
Amilan®
Automotive sector
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
Rockwell hardness | R-Sale,80°C | 12 -- | |
M-Sale,23°C | 93 -- | ||
R-Sale,23°C | 120 -- |
thermal performance | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | °C | 224 -- |
Linear coefficient of thermal expansion | MD | cm/cm/°C | 2.0E-5到3.0E-5 -- |
Melting temperature | °C | 225 -- | |
225 ℃(℉) | |||
specific heat | J/kg/°C | 1600 -- | |
thermal conductivity | W/m/K | 0.38 -- |
mechanical properties | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
Bending modulus | 80°C | MPa | 4700 3500 |
23°C | MPa | 9500 5100 | |
-40°C | MPa | 11800 9800 | |
bending strength | 23°C | MPa | 280 145 |
80°C | MPa | 155 105 | |
-40°C | MPa | 325 315 | |
Compressive stress | 23°C | 180 MPa | |
80°C | MPa | 95.0 70.0 | |
-40°C | MPa | 250 210 | |
Friction coefficient vs. Metal | 0.15 -- | ||
Rockwell hardness | ASTM D785 | R120.M93 | |
shear strength | 23°C | MPa | 85.0 -- |
Taber abraser | 1000Cycles | mg | 0.350 -- |
Tensile strain | Break,-40°C | % | 3.0 3.0 |
Break,23°C | % | 3.0 4.0 | |
Break,80°C | % | 4.0 | |
tensile strength | -40°C | MPa | 250 225 |
23°C | MPa | 185 105 | |
80°C | MPa | 100 70.0 |
Electrical performance | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
Arc resistance | sec | 131 | |
Dielectric constant | 23°C,1MHz | 4.00 4.30 | |
23°C,1kHz | 4.60 7.90 | ||
23°C,50Hz | 4.90 10.7 | ||
Dielectric strength | kV/mm | 20 18 | |
Dissipation factor | 23°C,1kHz | 0.030 0.18 | |
23°C,50Hz | 0.030 0.17 | ||
23°C,1MHz | 0.030 0.070 | ||
Volume resistivity | ohms·cm | 1E+15 1E+12 | |
ASTM D257/IEC 60093 | 10^13 Ω.cm |
Physical properties | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.36 | |
Shrinkage rate | MD:3.00mm4 | % | 0.20-0.40 -- |
TD:3.00mm3 | % | 0.50-0.80 -- | |
Water absorption rate | Saturation,23°C | % | 6.4 -- |
23°C,24hr | % | 1.1 -- | |
ASTM D570/ISO 62 | 1.1 % |
impact performance | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
Impact strength of simply supported beam without notch | -40°C | kJ/m² | 70 |
23°C | kJ/m² | 80 |
flammability | Test Condition | Test Method | TORAY JAPAN/CM1016G-30 |
---|---|---|---|
UL flame retardant rating | 0.79mm | HB -- |