Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PCTA BR001 EASTMAN USA
--
food,chip
High mobility,transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | EASTMAN USA/BR001 |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 103 R |
| thermal performance | Test Condition | Test Method | EASTMAN USA/BR001 |
|---|---|---|---|
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 65 °C |
| 0.45MPaUnannealed | ASTM D648 | 73 °C |
| mechanical properties | Test Condition | Test Method | EASTMAN USA/BR001 |
|---|---|---|---|
| Bending modulus | 23°C | ASTM D790 | 2000 Mpa |
| bending strength | 23°C | ASTM D790 | 69 Mpa |
| Elongation at Break | 23°C | ASTM D638 | 5.00 % |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 80 J/m |
| -40°C | ASTM D256 | 40 J/m | |
| Suspended wall beam without notch impact strength | -40°C | ASTM D256 | NB J/m |
| 23°C | ASTM D256 | NB J/m | |
| tensile strength | 23°C | ASTM D638 | 47 Mpa |
| Physical properties | Test Condition | Test Method | EASTMAN USA/BR001 |
|---|---|---|---|
| density | ASTM D792 | 1.20 g/cm³ | |
| Shrinkage rate | TD | ASTM D995 | 0.60 % |
| MD | ASTM D995 | 0.20 % |
| optical performance | Test Condition | Test Method | EASTMAN USA/BR001 |
|---|---|---|---|
| Transmittance rate | μm | ASTM D1003 | 89 % |
| turbidity | ASTM D1003 | 0.30 % |