Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA46 F11 DSM HOLAND
Stanyl® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM HOLAND/F11
Impact strength of simply supported beam without notch23°CISO 179/1eU50 kJ/m²
Mechanical propertiesTest ConditionTest MethodDSM HOLAND/F11
tensile strength 断裂, 160°CISO 527-270.0 Mpa
Tensile modulus--ISO 527-212000 Mpa
Tensile strain断裂, 120°CISO 527-22.7 %
bending strengthISO 178245 Mpa
Tensile strain断裂ISO 527-22.0 %
Flexural modulusISO 17811500 Mpa
Tensile strain断裂, 160°CISO 527-23.7 %
tensile strength 断裂ISO 527-2155 Mpa
断裂, 120°CISO 527-2100 Mpa
Tensile modulus160°CISO 527-25000 Mpa
120°CISO 527-27500 Mpa
Electrical performanceTest ConditionTest MethodDSM HOLAND/F11
relative permittivity100 HzIEC 602504.20
dielectric strengthIEC 60243-133 KV/mm
Volume resistivityIEC 60093> 1.0E+15 ohms·cm
relative permittivity1.00 GHzIEC 602503.90
1 MHzIEC 602503.90
10.0 GHzIEC 602503.90
Compared to the Leakage Tracking Index (CTI)IEC 60112 V
flammabilityTest ConditionTest MethodDSM HOLAND/F11
Flammability levelUL 94V-0
physical property Test ConditionTest MethodDSM HOLAND/F11
Water absorption rate平衡, 23°C, 50% RHISO 621.6 %
Shrinkage rate流量ISO 294-40.30 %
横向流量ISO 294-41.2 %
Thermal performanceTest ConditionTest MethodDSM HOLAND/F11
melting temperatureISO 11357-3325 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A305 °C
RTI Elec0.35 mmUL 746140 °C
Thermal Index - 5000 hrIEC 60216163 °C
Linear coefficient of thermal expansion流动ISO 11359-21.5E-5 3.0E-5 cm/cm/°C
横向ISO 11359-23.5E-5 7.0E-5 cm/cm/°C

Contact Us

Get App

Top