Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TP, Unspecified E-4701-5 HAPCO USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 无断裂 | |
| Suspended wall beam without notch impact strength | ASTM D256 | 无断裂 |
| hardness | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| Shore hardness | 邵氏A | ASTM D2240 | 65 |
| Supplementary Information | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| ThermalShockTest | Pass |
| Electrical performance | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.4E+12 ohms·cm | |
| dielectric strength | ASTM D149 | >16 kV/mm | |
| Dissipation Factor | 25°C,100kHz | ASTM D150 | 0.073 |
| dielectric constant | 1kHz | ASTM D150 | 4.40 |
| 100kHz | ASTM D150 | 4.10 |
| Mechanical properties | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 150 % |
| tensile strength | ASTM D638 | 6.89 MPa |
| thermosetting | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| Thermosetting mixed viscosity | 25°C | ASTM D4878 | 9200 cP |
| GelTime | 25°C | ASTM D2971 | 5.0 min |
| Thermosetting components | 部件A | 按重量计算的混合比:100.按容量计算的混合比:100 | |
| 部件B | 按重量计算的混合比:250.按容量计算的混合比:150 | ||
| stripping time | 21°C | 20to35 min |
| physical property | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D2566 | 0.050to0.15 % |
| density | ASTM D4669 | 1.50 g/cm³ | |
| Weight Percubicinch | 25 g |
| Thermal performance | Test Condition | Test Method | HAPCO USA/E-4701-5 |
|---|---|---|---|
| thermal conductivity | 0.42 W/m/K | ||
| Usage temperature | 125 °C | ||
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.5E-04 cm/cm/°C |
Contact Us
Get App
Top