Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAS RTP 1605 Z RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 80 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 530 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 123 |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 16 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 8E-03 |
| dielectric constant | 1MHz | ASTM D150 | 4.30 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0 % |
| tensile strength | ASTM D638 | 124 MPa | |
| compressive strength | ASTM D695 | 124 MPa | |
| Tensile modulus | ASTM D638 | 8960 MPa | |
| Flexural modulus | ASTM D790 | 7580 MPa | |
| bending strength | ASTM D790 | 172 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.36 % |
| density | ASTM D792 | 1.59 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.10 % |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 1605 Z |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 213 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 221 °C | |
| thermal conductivity | ASTMC177 | 0.32 W/m/K | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.7E-05 cm/cm/°C |
Contact Us
Get App
Top