Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DS0036IQ BK1D603C SABIC INNOVATIVE SAUDI
SABIC®
Medical and nursing suppl、Electronic and Electrical、Aerospace Applications、Plastic bag
Non chloro non bromine fl、electromagnetic shielding、RF shielding
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 1800 J/m |
| 23°C2 | ISO 180/1U | 85 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2800 Mpa | |
| bending strength | ISO 178 | 80.0 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 4.0 to 8.0 % |
| Flexural modulus | ISO 178 | 2600 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 3.8 % |
| tensile strength | 断裂 | ISO 527-2 | 55.0 Mpa |
| 屈服 | ISO 527-2 | 57.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.0E+4 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1.0E+2 - 1.0E+3 ohms | |
| Electromagnetic shielding effectiveness (EMI) | 3.00 mm | 内部方法 | 40 to 55 dB |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| UL flame retardant rating | 2.1 mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| Shrinkage rate | 流量 : 24小时 | ISO 294-4 | 0.40 - 0.70 % |
| 横向流量 : 24小时 | ISO 294-4 | 0.50 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火, 4.00 mm, 64.0 mm 跨距，HDT | ISO 75-2/Bf | 136 °C |
| 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距，HDT | ISO 75-2/Af | 125 °C | |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 5.6E-5 cm/cm/°C |
| 流动 : -40 到 40°C | ISO 11359-2 | 6.7E-5 cm/cm/°C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE SAUDI/DS0036IQ BK1D603C |
|---|---|---|---|
| drying time | 4.0 hr | ||
| screw speed | 30 to 60 rpm | ||
| Suggested maximum moisture content | 0.020 % | ||
| Temperature in the middle of the barrel | 310 to 320 °C | ||
| Temperature at the rear of the barrel | 295 to 305 °C | ||
| Processing (melt) temperature | 305 to 325 °C | ||
| drying temperature | 120 °C | ||
| Temperature at the front of the material cylinder | 320 to 330 °C | ||
| Back pressure | 0.200 to 0.300 Mpa | ||
| Temperature | 95 to 120 °C |
Contact Us
Get App
Top