Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC GS-2020MLR MITSUBISHI ENGINEERING JAPAN
IUPILON™
fibre,Camera applications
enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GS-2020MLR |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 135 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 4900 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 6000 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 2.3 % |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GS-2020MLR |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.35 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.1 - 0.3 % |
| processability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GS-2020MLR |
|---|---|---|---|
| process temperature | 280-300 °C | ||
| Dry conditions | 热风干燥 120℃---約4-8小时 | ||
| screw speed | 50-100 rpm | ||
| Temperature | 80-120 °C |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GS-2020MLR |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 3.0E-05 mm/mm.℃ |
Contact Us
Get App
Top