plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MMBS ZYLAR® 550 INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Ball Pressure TestISO 2039-160.0 MPa
thermal performanceTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A70.0 °C
0.45MPa,AnnealedISO 75-2/B81.0 °C
Maximum operating temperature250 °C
Vicat softening temperatureASTM D1525399.0 °C
ISO 306/B5073.0 °C
mechanical propertiesTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Bending modulusISO 1782000 MPa
bending strengthISO 17850.0 MPa
Tensile modulusISO 527-22100 MPa
Tensile strainBreak,23°CISO 527-250 %
tensile strengthYield,23°CISO 527-228.0 MPa
Electrical performanceTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Dielectric constant100HzIEC 602502.50
Surface resistivityIEC 60093>1.0E+14 ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodINEOS Barex/ZYLAR® 550
densityISO 11831.05 g/cm³
Melt Volume Flow Rate (MVR)220°C/10.0kgISO 113355.0 cm³/10min
200°C/5.0kgISO 11335.00 cm³/10min
Shrinkage rateISO 294-40.20to0.60 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.050 %
Saturation,23°CISO 620.10 %
impact performanceTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Charpy Notched Impact Strength23°CISO 1794.0 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/A6.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179NoBreak
Suspended wall beam without notch impact strengthISO 18080 kJ/m²
optical performanceTest ConditionTest MethodINEOS Barex/ZYLAR® 550
Refractive indexISO 4891.570
transmissivity550nmASTM D100390.0 %
turbidityASTM D10032.0 %

Contact Us

Get App

Top