Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS Wondel® C CSR0 Nanjing Julong Engineering Plastics Co., LTD
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 45 kJ/m² |
| hardness | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Rockwell hardness | R计秤 | ISO 2039-2 | 116 |
| Mechanical properties | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 20 % |
| tensile strength | 屈服 | ISO 527-2 | 50.0 MPa |
| bending strength | ISO 178 | 85.0 MPa |
| Electrical performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| flammability | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.50to0.70 % | |
| density | ISO 1183 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® C CSR0 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 90.0 °C |
Contact Us
Get App
Top