Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES Westlake Radel® R Westlake Plastics Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 690 J/m |
| Suspended wall beam without notch impact strength | ASTM D256 | 无断裂 |
| hardness | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 122 |
| Electrical performance | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 9E-04 |
| Volume resistivity | ASTM D257 | >1.0E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 14 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 3.45 |
| Mechanical properties | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 60to120 % |
| 屈服 | ASTM D638 | 7.2 % | |
| bending strength | 屈服 | ASTM D790 | 91.0 MPa |
| compressive strength | ASTM D695 | 98.9 MPa | |
| Tensile modulus | ASTM D638 | 2340 MPa | |
| Flexural modulus | ASTM D790 | 2410 MPa | |
| Compression Modulus | ASTM D695 | 1730 MPa | |
| tensile strength | 屈服 | ASTM D638 | 69.6 MPa |
| optical performance | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| transmissivity | ASTM D1746 | 50.0 % | |
| Haze ratio | ASTM D1746 | 15 % |
| flammability | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| UL flame retardant rating | 0.79mm | UL 94 | V-0 |
| Limiting Oxygen Index | ASTM D2863 | 38 % |
| physical property | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.37 % |
| density | ASTM D792 | 1.29 g/cm³ |
| Thermal performance | Test Condition | Test Method | Westlake Plastics Company/Westlake Radel® R |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 207 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 214 °C | |
| thermal conductivity | ASTMC177 | 0.35 W/m/K | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-05 cm/cm/°C |
Contact Us
Get App
Top