Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC TRISTAR® PC-10R-CL(22) PTS USA
--
Electrical and electronic applications, communication equipment
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
| thermal performance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 127 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 137 °C | |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 7E-05 cm/cm/°C |
| TD:-40to95°C | ASTME831 | 6.8E-05 cm/cm/°C | |
| RTI | UL 746 | 125 °C | |
| RTI Elec | UL 746 | 125 °C | |
| RTI Imp | UL 746 | 115 °C |
| mechanical properties | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Bending modulus | 3.17mm | ASTM D790 | 2410 MPa |
| bending strength | Yield,3.17mm | ASTM D790 | 89.6 MPa |
| elongation | Break,3.17mm | ASTM D638 | 120 % |
| tensile strength | Yield,3.17mm | ASTM D638 | 60.3 MPa |
| Electrical performance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Arc resistance | ASTM D495 | PLC6 | |
| ASTM D495 | 60.0to120 sec | ||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 1 |
| High arc combustion index | 3.00mm | UL 746 | PLC 0 |
| 1.50mm | UL 746 | PLC 0 | |
| 1.5mm | UL 746 | PLC 0 | |
| 3.0mm | UL 746 | PLC 1 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 |
| HVTR | UL 746 | PLC 4 mm/min | |
| Hot wire ignition | 3.0mm | UL 746 | PLC 2 |
| 1.5mm | UL 746 | PLC 3 | |
| 3.00mm | UL 746 | PLC 1 sec | |
| 1.50mm | UL 746 | PLC 2 sec |
| Physical properties | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| density | ASTM D792 | 1.20 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 22 g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| impact performance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 750 J/m |
| flammability | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 775 °C | |
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| optical performance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10R-CL(22) |
|---|---|---|---|
| Refractive index | ASTM D542 | 1.586 | |
| transmissivity | ASTM D1003 | 89.0 % | |
| turbidity | ASTM D1003 | 1.0 % |