Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MDPE EL-Lene™ M688WC Thailand Siam Chemical
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 98 J/m |
| hardness | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 55 |
| Mechanical properties | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 790 % |
| tensile strength | 断裂 | ASTM D638 | 37.0 MPa |
| Flexural modulus | ASTM D790 | 600 MPa | |
| tensile strength | 屈服 | ASTM D638 | 24.0 MPa |
| Electrical performance | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric constant | 1MHz | ASTM D1531 | 2.50 |
| dielectric strength | ASTM D149 | 20 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D1531 | 5E-03 |
| physical property | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| density | ASTM D1505 | 0.948 g/cm³ | |
| Environmental stress cracking resistance | 50°C,10%Igepal,F0 | ASTM D1693 | >1000 hr |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.24 g/10min |
| Carbon black content | ASTM D4218 | 2.5 % |
| Thermal performance | Test Condition | Test Method | Thailand Siam Chemical/EL-Lene™ M688WC |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-75.0 °C | |
| Oxygen induction time | 200°C | ASTM D3895 | >100 min |
Contact Us
Get App
Top