Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA/ABS N NG-04 BASF GERMANY
Terblend®
Automotive sector、Shell
dimensional stability 、High rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 25 kJ/m² |
| 23°C | ISO 179 | 30 kJ/m² |
| hardness | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 107 Mpa |
| film | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| elongation | 断裂 | ISO 527-3 | 3.2 % |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 5400 Mpa | |
| bending strength | ISO 178 | 115 Mpa | |
| Flexural modulus | ISO 178 | 4500 Mpa | |
| tensile strength | 屈服,23°C | ISO 527-2 | 60.0 Mpa |
| Tensile strain | 屈服,23°C | ISO 527-2 | 3.2 % |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 2.90 |
| Surface Resistivity | IEC 60093 | 1E+14 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.013 |
| physical property | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.40 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.90 % |
| Melt volume flow rate | 240°C/10.0kg | ISO 1133 | 15.0 cm3/10min |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/N NG-04 |
|---|---|---|---|
| vicat | -- | ISO 306/A50 | 180 °C |
| Heat distortion temperature | 1.8MPa,退火，HDT | ISO 75-2/A | 100 °C |
| vicat | -- | ISO 306/B50 | 114 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 4E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,Annealed，HDT | ISO 75-2/B | 164 °C |
Contact Us
Get App
Top