Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC/ABS C1110HF-100 SABIC INNOVATIVE US
CYCOLAC™
Electrical field,Electronic field,Automotive interior parts
High mobility,High impact resistance, High flow,Flow improvement
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/C1110HF-100 |
|---|---|---|---|
| Hot deformation temperature | 1.8Mpa | ASTM D-648 | 110 °C |
| 0.45Mpa | ASTM D-648 | 126 °C | |
| Linear coefficient of thermal expansion | ASTM E-831 | - 1/℃ | |
| Long term use temperature | 无冲击 | UL -746B | 60 °C |
| 含冲击 | UL -746B | 60 °C | |
| UL flame retardant rating | UL -94 | 1.5 mm | |
| UL -94 | HB | ||
| Vicat softening temperature | ASTM D-1525 | - °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/C1110HF-100 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 2377 Mpa | |
| bending strength | ASTM D-790 | 87 Mpa | |
| Elongation at Break | Break点 | ASTM D-638 | 75 % |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 640 J/m |
| Rockwell hardness | ASTM D-785 | - R | |
| Tensile modulus | ASTM D-638 | 2205 Mpa | |
| tensile strength | 屈伏点 | ASTM D-638 | 59 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/C1110HF-100 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D-150 | - |
| Dissipation factor | 1MHz | ASTM D-150 | - |
| Surface resistivity | ASTM D-257 | - ohm-cm | |
| Volume resistivity | ASTM D-257 | - ohm-cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/C1110HF-100 |
|---|---|---|---|
| density | ASTM D-792 | 1.14 | |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 E-3 |
| Water absorption rate | ASTM D-570 | - % |