Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Novodur® H701 INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodINEOS Barex/Novodur® H701
Charpy Notched Impact Strength23°CISO 17924 kJ/m²
-30°CISO 17913 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179120 kJ/m²
23°CISO 179180 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/A24 kJ/m²
-30°CISO 180/A12 kJ/m²
hardnessTest ConditionTest MethodINEOS Barex/Novodur® H701
ball-indentation hardnessISO 2039-195.0 MPa
Mechanical propertiesTest ConditionTest MethodINEOS Barex/Novodur® H701
Tensile strain断裂,23°CISO 527-2>15 %
tensile strength 屈服,23°CISO 527-241.0 MPa
Tensile modulusISO 527-22100 MPa
Tensile strain屈服,23°CISO 527-22.7 %
Flexural modulusISO 1782100 MPa
bending strengthISO 17865.0 MPa
Electrical performanceTest ConditionTest MethodINEOS Barex/Novodur® H701
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602503.10
Dissipation Factor100HzIEC 602505E-03
relative permittivity1MHzIEC 602502.90
dielectric strength1.50mmIEC 60243-133 kV/mm
Dissipation Factor1MHzIEC 602509E-03
physical property Test ConditionTest MethodINEOS Barex/Novodur® H701
Melt volume flow rate220°C/10.0kgISO 11338.00 cm³/10min
Shrinkage rateISO 294-40.50to0.80 %
densityISO 11831.04 g/cm³
Thermal performanceTest ConditionTest MethodINEOS Barex/Novodur® H701
Heat distortion temperature1.8MPa,退火，HDTISO 75-2/A99.0 °C
vicatISO 306/B50103 °C
Linear coefficient of thermal expansionMDISO 11359-29E-05 cm/cm/°C
Heat distortion temperature0.45MPa,退火，HDTISO 75-2/B105 °C

Contact Us

Get App

Top