Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
NBR NANCAR® 4155 Nantex Industry Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 4155 |
|---|---|---|---|
| Shore hardness | 邵氏A,5秒5 | ASTM D2240 | 78 |
| 邵氏A,5秒3 | ASTM D2240 | 76 | |
| 邵氏A,5秒4 | ASTM D2240 | 77 |
| elastomer | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 4155 |
|---|---|---|---|
| tensile strength | 屈服4 | ASTM D412 | 26.8 MPa |
| 屈服5 | ASTM D412 | 26.0 MPa | |
| 屈服3 | ASTM D412 | 26.4 MPa | |
| 300%应变4 | ASTM D412 | 12.8 MPa | |
| 300%应变3 | ASTM D412 | 10.9 MPa | |
| compression set | 100°C,70hr | ASTM D395 | 59 % |
| tensile strength | 300%应变5 | ASTM D412 | 13.3 MPa |
| elongation | 断裂5 | ASTM D412 | 520 % |
| 断裂4 | ASTM D412 | 540 % | |
| 断裂3 | ASTM D412 | 590 % | |
| tear strength | ASTM D624 | 58.0 kN/m |
| aging | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 4155 |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在IRM903油中 | ASTM D471 | -5.0 |
| Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -28 % |
| Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#1油中 | ASTM D471 | 3.0 |
| Change rate of ultimate elongation in air | 100°C,70hr | ASTM D573 | -22 % |
| Change rate of tensile strength in air | 100°C,70hr | ASTM D573 | -1.0 % |
| 100°C,70hr,在ASTM#1油中 | ASTM D471 | -11 % | |
| volume change | 100°C,70hr,ASTM标准油（1号） | ASTM D471 | -0.20 % |
| Change rate of tensile strength in air | 100°C,70hr,在IRM903油中 | ASTM D471 | -26 % |
| volume change | 100°C,70hr,在IRM903油中 | ASTM D471 | 8.5 % |
| Change rate of ultimate elongation in air | 100°C,70hr,在IRM903油中 | ASTM D471 | -28 % |
| Change rate of hardness (Shore) in the air | 邵氏A,100°C,70hr | ASTM D573 | 5.0 |
| physical property | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 4155 |
|---|---|---|---|
| density | 1.00 g/cm³ | ||
| Soluble inMEK | 100 % | ||
| bound acrylonitrile content | 内部方法 | 40.0 % | |
| Mooney viscosity | ML1+4,100°C | ASTM D1646 | 51 MU |
| ML1+4,100°C2 | ASTM D1646 | 78 MU | |
| stabilizer | Non-staining |
| Thermal performance | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 4155 |
|---|---|---|---|
| Heat loss | ASTM D5688 | 0.30 % |
Contact Us
Get App
Top