Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 1013NW8 UBE JAPAN
UBE
--
Low viscosity,Fast forming cycle
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | UBE JAPAN/1013NW8 |
---|---|---|---|
Hot deformation temperature | HDT | ASTM D648/ISO 75 | 75 ℃(℉) |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 8 mm/mm.℃ |
mechanical properties | Test Condition | Test Method | UBE JAPAN/1013NW8 |
---|---|---|---|
Bending modulus | ASTM D790/ISO 178 | 28500 kg/cm²(MPa)[Lb/in²] | |
bending strength | ASTM D790/ISO 178 | 1100 kg/cm²(MPa)[Lb/in²] | |
Charpy Notched Impact Strength | ASTM D256/ISO 179 | 6.5 kg·cm/cm(J/M)ft·lb/in | |
elongation | ASTM D638/ISO 527 | 8 % | |
Elongation at Break | ASTM D638/ISO 527 | 100 % | |
tensile strength | ASTM D638/ISO 527 | 800 kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | UBE JAPAN/1013NW8 |
---|---|---|---|
Dielectric constant | ASTM D150/IEC 60250 | 3.8 | |
Volume resistivity | ASTM D257/IEC 60093 | 10 Ω.cm |
other | Test Condition | Test Method | UBE JAPAN/1013NW8 |
---|---|---|---|
characteristic | 阻燃性 |
Physical properties | Test Condition | Test Method | UBE JAPAN/1013NW8 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.14 | |
Water absorption rate | ASTM D570/ISO 62 | 10.7 % |