Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PMMA Perfactory® R5 EnvisionTEC, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | 27to50 J/m |
| hardness | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 81 |
| film | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| GravesTear | ASTM D1004 | 154.3 kN/m |
| Mechanical properties | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 11to25 % |
| tensile strength | ASTM D638 | 31.0to39.0 MPa | |
| elongation | 屈服 | ASTM D638 | 16 % |
| Flexural modulus | ASTM D790 | 1190to1380 MPa | |
| Tensile modulus | ASTM D638 | 1250to1510 MPa | |
| bending strength | ASTM D790 | 40.0to45.0 MPa |
| physical property | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| Water absorption rate | 平衡 | ASTM D570 | 0.78 % |
| Thermal performance | Test Condition | Test Method | EnvisionTEC, Inc./Perfactory® R5 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 65.4to88.0 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 84.5to103 °C | |
| Linear coefficient of thermal expansion | MD：-40到0°C | ASTME381 | 5.5E-5到6.3E-5 cm/cm/°C |
| MD：100到150°C | ASTME381 | 1.9E-4到2.0E-4 cm/cm/°C | |
| Glass Transition Temperature | ASTME1545 | 37.0to52.0 °C | |
| Linear coefficient of thermal expansion | MD：0到50°C | ASTME381 | 8.8E-5到9.4E-5 cm/cm/°C |
| MD：50到100°C | ASTME381 | 1.7E-4到1.9E-4 cm/cm/°C |
Contact Us
Get App
Top