Mechanical properties	Test Condition	BASF GERMANY/B35Z
Impact strength of cantilever beam gap	+23℃干/湿	87/NB KJ/m
Fracture stress (V=50mm/min)	干/湿	50/40 Mpa
Tensile modulus	干/湿	1900/700 Mpa
ball-indentation hardness	干/湿	100/50 Mpa
Charpy Notched Impact Strength	-30℃干	NB KJ/m
Impact strength of cantilever beam gap	-30℃干	25 KJ/m
Charpy Notched Impact Strength	+23℃干/湿	NB/NB KJ/m
elongation at break	干/湿，V=50mm/min	4/20 %
Tensile yield stress (V=50mm/min)	干/湿	50/40 Mpa
Charpy Notched Impact Strength	+23℃干/湿	NB/NB

Electrical performance	Test Condition	BASF GERMANY/B35Z
Compared to the Leakage Traceability Index (CTI)	干/湿	CTI 600
dielectric strength	干/湿	100/60 KV/mm
Surface Resistivity	干/湿	10 Ω
Volume resistivity	干/湿	10 Ω.cm
dielectric constant	1MHz,干/湿	3.1/3.6
loss angle	1MHz,干/湿	0.011/0.07

Thermal performance	Test Condition	BASF GERMANY/B35Z
Linear coefficient of thermal expansion	干态	7-10
Heat distortion temperature	1.8MPa负荷干态，HDT	50 °C
thermal conductivity	干态	0.23 W/(m.K)
maximum service temperature		>160 °C
Heat distortion temperature	0.45MPa负荷,干态，HDT	70 °C
specific heat	干态	1.5 J/(g.K)

Get App

Top