Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PLA 4032D(粉) NATUREWORKS USA
Ingeo™
chip、Laminate
Thermal stability、High mobility、standard、Updatable resources、Oil resistant、Biodegradable、Food contact compliance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Films | Test Condition | Test Method | NATUREWORKS USA/4032D(粉) |
|---|---|---|---|
| Tensile Strain | MD，断裂，25 µm MD，断裂，25 µm | ASTM D882 | 180 % |
| Water Vapor Transmission Rate | ASTM F1249 | 380 g·mm/m²/atm/24 hr | |
| Elmendorf Tear Strength | MD，25 µm MD，25 µm | ASTM D1922 | 17 g |
| Secant Modulus | TD，25 µm TD，25 µm | ASTM D882 | 3790 Mpa |
| Tensile Strength | TD，屈服，25 µm TD，屈服，25 µm | ASTM D882 | 145 Mpa |
| Spencer Impact | 2.5 J | ||
| Tensile Strength | MD，屈服，25 µm MD，屈服，25 µm | ASTM D882 | 103 Mpa |
| Film Thickness | 测试 经测试 | 25 µm | |
| Elmendorf Tear Strength | TD，25 µm TD，25 µm | ASTM D1922 | 14 g |
| Carbon Dioxide Transmission Rate | Internal Method | 2850 cm³/m²/24 hr | |
| Oxygen Transmission Rate | ASTM D1434 | 675 cm³/m²/24 hr | |
| Tensile Strain | TD，断裂，25 µm TD，断裂，25 µm | ASTM D882 | 100 % |
| Secant Modulus | MD，25 µm MD，25 µm | ASTM D882 | 3450 Mpa |
| Physical | Test Condition | Test Method | NATUREWORKS USA/4032D(粉) |
|---|---|---|---|
| Melt Mass-Flow Rate | 210℃，2.16kg 210℃/2.16 kg | ASTM D1238 | 7 g/10min |
| Melt Density | 230℃ 230℃ | 1.08 g/cm³ |
| Thermal | Test Condition | Test Method | NATUREWORKS USA/4032D(粉) |
|---|---|---|---|
| Peak Crystallization Temperature? | DSC DSC 12 | ASTM D3418 | 155 to 170 °C |
| Optical | Test Condition | Test Method | NATUREWORKS USA/4032D(粉) |
|---|---|---|---|
| Gloss | 20°，25.4 µm 20°，25.4 µm | ASTM D2457 | 90 |
| Haze | 25.4 µm 25.4 µm | ASTM D1003 | 2.1 % |
| Impact Properties | Test Condition | Test Method | NATUREWORKS USA/4032D(粉) |
|---|---|---|---|
| Notched Izod Impact Strength | ASTM D256 | 16 J/m |
Contact Us
Get App
Top