Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PM270 BV Spain Repsol
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Spain Repsol/PM270 BV |
|---|---|---|---|
| melt mass-flow rate | 230℃，2.16kg | ISO 1133 | 12 g/10min |
| density | ISO 1183 | 1.04 g/cm |
| Mechanical properties | Test Condition | Test Method | Spain Repsol/PM270 BV |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 0℃ | ISO 180 | 15 kj/m |
| Impact strength of cantilever beam gap | 0℃ | ISO 180 | 2.30 kj/m |
| Suspended wall beam without notch impact strength | -20℃ | ISO 180 | 11 kj/m |
| ball-indentation hardness | ISO 2039-1 | 91 MPa | |
| Tensile modulus | ISO 527-2 | 2200 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 25 MPa |
| 屈服 | ISO 527-2 | 32 MPa | |
| Flexural modulus | ISO 178 | 2700 MPa | |
| Impact strength of cantilever beam gap | -20℃ | ISO 180 | 1.50 kj/m |
| Suspended wall beam without notch impact strength | 23℃ | ISO 180 | 30 kj/m |
| elongation at yield | ISO 527-2 | 5 % | |
| Shore hardness | ISO 868 | 73 | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | 2.75 kj/m |
| elongation | 断裂 | ISO 527-2 | 22 % |
| Thermal performance | Test Condition | Test Method | Spain Repsol/PM270 BV |
|---|---|---|---|
| vicat | ISO 306/B | 95 ℃ | |
| ISO 306/A | 153 ℃ | ||
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-2/B | 106 ℃ |
| 1.80MPa，HDT | ISO 75-2/B | 58 ℃ |
Contact Us
Get App
Top