Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC IN2200 IDEMITSU JAPAN
TARFLON™
Home appliance components、Eye medicine container、Angle wax contact lens bo、Artificial kidney
UV resistance、 Improved hydrolysis resi
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/IN2200 |
|---|---|---|---|
| elongation | 断裂 | ASTM D-638 | 115 % |
| Taber wear resistance | ASTM D-1044 | 12 mg | |
| Tensile modulus | ASTM D-638 | 2300 Mpa | |
| Flexural modulus | ASTM D-790 | 2350 Mpa | |
| bending strength | ASTM D-790 | 93 Mpa | |
| tensile strength | ASTM D-638 | 64 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 70 KJ/m | |
| Rockwell hardness | ASTM D-785 | R-120 |
| Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/IN2200 |
|---|---|---|---|
| dielectric constant | 60HZ | ASTM D-150 | 2.91 |
| arc resistance | ASTM D-495 | 110 sec | |
| dielectric strength | 1.6mm | ASTM D-149 | 30 KV/mm |
| Dielectric loss positive connection | 60HZ | ASTM D-150 | 6.6×10 |
| Inherent resistance of volume | ASTM D-257 | 10 Ω.cm |
| physical property | Test Condition | Test Method | IDEMITSU JAPAN/IN2200 |
|---|---|---|---|
| melt mass-flow rate | 300℃ | ISO 1133 | 12 g/10min |
| density | ASTM D-792 | 1.20 | |
| Water absorption rate | 23℃，24时间 | ASTM D-570 | 0.23 % |
| Total Light Transmittance | 3mm | ASTM D-1003 | 85-89 % |
| Thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/IN2200 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa，HDT | ASTM D-648 | 132 °C |
| vicat | ISO 306 | 148 °C | |
| Shrinkage rate | ASTM D-955 | 0.5-0.7 % | |
| UL flame retardant rating | 1.47mm | UL 94 | V-2 |
| Linear coefficient of thermal expansion | ASTM D-696 | 6.5 ×10 |
Contact Us
Get App
Top