Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC L-1225R TEIJIN JAPAN
PANLITE®
Electrical appliances,container,Disposable tableware,Lighting applications,Electronic field,Electrical field,Mechanical components,Nursing supplies,Application in the automotive field,Car headlights
High mobility
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 136 °C |
1.8MPa,Unannealed | ISO 75-2/A | 123 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 7E-05 cm/cm/°C |
MD | ISO 11359-2 | 7E-05 cm/cm/°C | |
RTI Elec | 1.5mm | UL 746 | 125 °C |
RTI Imp | 1.5mm | UL 746 | 115 °C |
RTI Str | 1.5mm | UL 746 | 125 °C |
Vicat softening temperature | ISO 306/B50 | 142 °C |
mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Bending modulus | ISO 178 | 2400 Mpa | |
bending strength | ISO 178 | 95.0 Mpa | |
Nominal tensile fracture strain | ISO 527-2/50 | >50 % | |
Tensile modulus | ISO 527-2/1 | 2400 Mpa | |
Tensile strain | Yield | ISO 527-2/50 | 6.0 % |
tensile strength | Yield | ISO 527-2/50 | 62.0 Mpa |
Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
Dielectric strength | IEC 60243-1 | 30 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 9E-03 |
100Hz | IEC 60250 | 1E-03 | |
Relative permittivity | 100Hz | IEC 60250 | 3.10 |
1MHz | IEC 60250 | 3.00 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
density | ISO 1183 | 1.20 g/cm³ | |
Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 25.0 cm3/10min |
Shrinkage rate | MD:4.00mm | Internal Method | 0.50-0.70 % |
TD:4.00mm | Internal Method | 0.50-0.70 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
impact performance | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179 | 53 kJ/m² | |
Impact strength of simply supported beam without notch | ISO 179 | NoBreak |
flammability | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Burning wire flammability index | 3.2mm | IEC 60695-2-12 | 875 °C |
1.5mm | IEC 60695-2-12 | 825 °C | |
Hot filament ignition temperature | 3.2mm | IEC 60695-2-13 | 875 °C |
1.5mm | IEC 60695-2-13 | 850 °C | |
UL flame retardant rating | 2.1mm | UL 94 | HB |
0.40mm | UL 94 | V-2 |
optical performance | Test Condition | Test Method | TEIJIN JAPAN/L-1225R |
---|---|---|---|
Refractive index | ASTM D542 | 1.585 | |
transmissivity | 3000μm | ASTM D1003 | 88.0 % |