Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP A435-NC-VF3001 CELANESE USA
VECTRA®
Automotive Applications,Home appliance components
Flame retardant,enhance,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Rockwell hardness | M-Scale | ISO 2039-2 | 55 |
thermal performance | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 162 °C |
0.45MPa,Unannealed | ISO 75-2/B | 250 °C | |
1.8MPa,Unannealed | ISO 75-2/A | 230 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.9E-05 cm/cm/°C |
MD | ISO 11359-2 | 1E-06 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 280 °C | |
Vicat softening temperature | ISO 306/B50 | 146 °C |
mechanical properties | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 10500 Mpa |
bending strength | 23°C | ISO 178 | 206 Mpa |
Compressive modulus | ISO 604 | 10500 Mpa | |
CompressiveStress | 1%Strain | ISO 604 | 77.0 Mpa |
Tensile modulus | ISO 527-2/1A/1 | 11000 Mpa | |
Tensile strain | Break | ISO 527-2/1A/5 | 3.3 % |
tensile strength | Break | ISO 527-2/1A/5 | 171 Mpa |
Electrical performance | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Arc resistance | Internal Method | 130 sec | |
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 32 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.016 |
100Hz | IEC 60250 | 0.020 | |
Relative permittivity | 100Hz | IEC 60250 | 3.50 |
1MHz | IEC 60250 | 3.10 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.10 % |
TD | ISO 294-4 | 0.40 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 2E-03 % |
impact performance | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 38 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 33 kJ/m² |
flammability | Test Condition | Test Method | CELANESE USA/A435-NC-VF3001 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |