Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66/6 FR 66/6 VOM DOMO CHEM GERMANY
--
Automotive interior parts、Automotive External Parts、Electrical applications
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 80 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 70 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3600 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 80.0 Mpa |
| bending strength | ISO 178 | 120 Mpa | |
| Flexural modulus | ISO 178 | 3300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 15 % |
| Electrical performance | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1.0E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案 A | IEC 60112 | PLC 0 |
| Surface Resistivity | IEC 60093 | 1.0E+13 ohms |
| flammability | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| burning rate | FMVSS 302 | < 100 mm/min | |
| UL flame retardant rating | 3.0 mm | UL 94 | V-0 |
| 0.40 mm | UL 94 | V-0 | |
| 1.5 mm | UL 94 | V-0 | |
| Hot filament ignition temperature | 1.0 到 3.0 mm | IEC 60695-2-13 | 750 °C |
| Burning wire flammability index | 1.0 到 3.0 mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| Shrinkage rate | 流量 : 23°C, 72小时 | ISO 2577 | 1.0 - 1.2 % |
| 横向流量 : 23°C, 72小时 | ISO 2577 | 1.0 - 1.2 % |
| Thermal performance | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 262 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 200 °C |
| vicat | ISO 306/B50 | 215 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 75.0 °C |
| injection | Test Condition | Test Method | DOMO CHEM GERMANY/FR 66/6 VOM |
|---|---|---|---|
| drying time | 2.0 to 4.0 hr | ||
| Processing (melt) temperature | 260 to 280 °C | ||
| drying temperature | 75 to 85 °C | ||
| Temperature | 60 to 80 °C |
Contact Us
Get App
Top