Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEK RTP 2285 A RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 750 J/m |
Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 80 J/m |
Supplementary Information | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
Primary Additive | 30 % |
Electrical performance | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
Volume resistivity | ASTM D257 | <1.0E+5 ohms·cm |
Mechanical properties | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
tensile strength | ASTM D638 | 262 MPa | |
elongation | 屈服 | ASTM D638 | 1.6 % |
Tensile modulus | ASTM D638 | 26200 MPa | |
Flexural modulus | ASTM D790 | 24800 MPa | |
bending strength | ASTM D790 | 379 MPa |
flammability | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
Shrinkage rate | MD:3.20mm | ASTM D955 | 0.050 % |
water content | 0.10 % | ||
density | ASTM D792 | 1.41 g/cm³ |
Thermal performance | Test Condition | Test Method | RTP US/RTP 2285 A |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | >316 °C |
Contact Us
Get App
Top