Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT LW9020FR NC010 DUPONT USA
Cristin®
Electronic and electrical components
Low warpage,Flame retardant,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 215 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 175 °C | |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1E-04 cm/cm/°C |
| MD | ISO 11359-2 | 3E-05 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 225 °C |
| mechanical properties | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| bending strength | ISO 178 | 155 Mpa | |
| Tensile creep modulus | 1hr | ISO 899-1 | 7500 Mpa |
| 1000hr | ISO 899-1 | 6000 Mpa | |
| Tensile modulus | ISO 527-2 | 8500 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.0 % |
| tensile strength | Break | ISO 527-2 | 110 Mpa |
| Electrical performance | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
| Dielectric strength | -- | IEC 60243-1 | 29 KV/mm |
| 2.00mm3 | IEC 60243-1 | 20 KV/mm | |
| 2.00mm4 | IEC 60243-1 | 20 KV/mm | |
| 1.00mm3 | IEC 60243-1 | 29 KV/mm | |
| Dissipation factor | 1MHz | IEC 60250 | 0.015 |
| 100Hz | IEC 60250 | 1.8E-03 | |
| Relative permittivity | 100Hz | IEC 60250 | 3.70 |
| 1MHz | IEC 60250 | 3.50 | |
| Surface resistivity | IEC 60093 | 1E+14 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| MediumDensity | 1.36 g/cm³ | ||
| Shrinkage rate | MD | ISO 294-4 | 0.40 % |
| TD | ISO 294-4 | 0.80 % | |
| SpecificHeatCapacity of Melt | 1900 J/kg/°C | ||
| ThermalConductivityofMelt | 0.25 W/m/K | ||
| Top out temperature | 170 °C | ||
| Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.23 % |
| Saturation,23°C,2.00mm | ISO 62 | 0.78 % |
| impact performance | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 35 kJ/m² |
| 23°C | ISO 179/1eU | 40 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 33 kJ/m² |
| -30°C | ISO 180/1U | 33 kJ/m² |
| flammability | Test Condition | Test Method | DUPONT USA/LW9020FR NC010 |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 27 % | |
| FMVSS flammability | FMVSS302 | DNI | |
| UL flame retardant rating | 3.0mm | IEC 60695-11-10,-20 | V-0 |
| 3.0mm | UL 94 | V-0 | |
| 1.5mm | IEC 60695-11-10,-20 | V-0 | |
| 1.5mm | UL 94 | V-0 |