plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM WA-11H MITSUBISHI THAILAND
--
Vehicle electronics,Electronic and Electrical Applications
Lubricity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A100 °C
Linear coefficient of thermal expansionTDISO 11359-21.1E-04 cm/cm/°C
MDISO 11359-21.1E-04 cm/cm/°C
Melting temperatureISO 11357-3170 °C
mechanical propertiesTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
Bending modulusISO 1782800 Mpa
bending strengthISO 17889.0 Mpa
Nominal tensile fracture strainISO 527-221 %
Tensile modulusISO 527-22900 Mpa
Tensile strainYieldISO 527-28.0 %
tensile strengthYieldISO 527-258.0 Mpa
Electrical performanceTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
Surface resistivityIEC 600931E+16 ohms
Volume resistivityIEC 600931E+14 ohms·cm
Physical propertiesTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
melt mass-flow rate190°C/2.16kgISO 113329 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 113325.0 cm3/10min
Shrinkage rateMD:3.00mm2.1 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
impact performanceTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
Impact strength of simply supported beam without notch23°CISO 179150 kJ/m²
flammabilityTest ConditionTest MethodMITSUBISHI THAILAND/WA-11H
UL flame retardant rating0.8mmUL 94HB