Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

SPS SP151 IDEMITSU JAPAN
XAREC™
Electrical applications,Household daily necessities
Glass fiber reinforced,High temperature resistan,Injection grade
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 265 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 230 °C | |
| Linear coefficient of thermal expansion | MD:-30to30°C | TMA | 2.2E-05 cm/cm/°C |
| ASTM D696/ISO 11359 | MD 2.2 mm/mm.℃ | ||
| TD:-30to30°C | TMA | 4.9E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| Bending modulus | ISO 178 | 9800 Mpa | |
| ASTM D790/ISO 178 | 9.8 kg/cm²(MPa)[Lb/in²] | ||
| bending strength | ASTM D790/ISO 178 | 165 kg/cm²(MPa)[Lb/in²] | |
| ISO 178 | 165 Mpa | ||
| Elongation at Break | ASTM D638/ISO 527 | 2.1 % | |
| Rockwell hardness | ASTM D785 | 47 | |
| Tensile modulus | ISO 527-2 | 11000 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.1 % |
| tensile strength | ASTM D638/ISO 527 | 100 kg/cm²(MPa)[Lb/in²] | |
| Break | ISO 527-2 | 100 Mpa |
| Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| Arc resistance | ASTM D495 | PLC6 | |
| ASTM D495/IEC 60112 | 110 | ||
| Compared to the anti leakage trace index | CTI)3 | IEC 60112 | PLC 0 |
| Dielectric constant | 1MHz | IEC 60250 | 3.40 |
| Dielectric strength | ASTM D149 | 50 KV/mm | |
| Dissipation factor | 1MHz | IEC 60250 | <1.0E-3 |
| Volume resistivity | IEC 60093 | >1.0E+16 ohms·cm | |
| ASTM D257/IEC 60093 | >1.0*10^16 Ω.cm |
| Physical properties | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.41 | |
| Shrinkage rate | ASTM D955 | MD 0.1-0.4 % | |
| MD | Internal Method | 0.10-0.40 % | |
| TD | Internal Method | 0.30-0.70 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.020 % |
| ASTM D570/ISO 62 | 0.02 % |
| impact performance | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 32 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 29 kJ/m² |
| flammability | Test Condition | Test Method | IDEMITSU JAPAN/SP151 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |