Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP G3230AE SABIC SAUDI
SABIC®
Automotive sector,Engine hood parts
Low volatility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | SABIC SAUDI/G3230AE |
|---|---|---|---|
| Tensile modulus | 23℃，4.00 mm，注塑 | ISO 527-2/1A/50 | 6500 Mpa |
| Charpy Notched Impact Strength | 23℃，注塑 | ISO 179/1eU | 53 kJ/m² |
| Flexural modulus | 4.00 mm，注塑 | ASTM D-790 | 6300 Mpa |
| Impact strength of cantilever beam gap | 23℃，注塑 | ISO 180/1A | 12 kJ/m² |
| Charpy Notched Impact Strength | 23℃，注塑 | ISO 179/1eA | 12 kJ/m² |
| tensile strength | 断裂，4.00 mm，注塑 | ISO 527-2/1A/50 | 97 Mpa |
| Tensile strain | 断裂，4.00 mm，注塑 | ISO 527-2/1A/50 | >3.7 % |
| physical property | Test Condition | Test Method | SABIC SAUDI/G3230AE |
|---|---|---|---|
| melt mass-flow rate | 230℃,2.16kg | ISO 1133 | 12 g/10min |
| Shrinkage rate | 24小时 | 内部方法 | 0.6 % |
| Thermal performance | Test Condition | Test Method | SABIC SAUDI/G3230AE |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动,23-80℃ | ASTM D-696 | 3.1E-05 cm/cm/℃ |
| Heat distortion temperature | 0.45 MPa，未退火，HDT | ISO 75-2/A | 150 °C |
| Linear coefficient of thermal expansion | 流动,-30-30℃ | ASTM D-696 | 3.3E-05 cm/cm/℃ |
Contact Us
Get App
Top