Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS 1140A64 JAPAN POLYPLASTIC
DURAFIDE®
small home appliances,Fitness equipment,Electrical field,Electronic field,Automotive sector,sporting goods
Glass fiber reinforced,High rigidity,high strength,High impact resistance,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| ColourNumber | HF2000/HD9100 |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-0 | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 270 °C |
| Linear coefficient of thermal expansion | TD | 4E-05 cm/cm/°C | |
| ASTM D696/ISO 11359 | 2 mm/mm.℃ | ||
| MD | 2E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| Bending modulus | ISO 178 | 14000 Mpa | |
| ASTM D790/ISO 178 | 14000 kg/cm²(MPa)[Lb/in²] | ||
| bending strength | ASTM D790/ISO 178 | 280 kg/cm²(MPa)[Lb/in²] | |
| ISO 178 | 280 Mpa | ||
| Elongation at Break | ASTM D638/ISO 527 | 1.8 % | |
| Tensile strain | Break | ISO 527-2 | 1.8 % |
| tensile strength | ASTM D638/ISO 527 | 200 kg/cm²(MPa)[Lb/in²] | |
| ISO 527-2 | 200 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 4 | |
| Dielectric constant | 1kHz | IEC 60250 | 4.50 |
| 1MHz | IEC 60250 | 4.50 | |
| Dielectric strength | 3.00mm | IEC 60243-1 | 16 KV/mm |
| Dissipation factor | 1MHz | IEC 60250 | 2E-03 |
| 耐电弧性 | IEC 60250 | 123 sec | |
| 1kHz | IEC 60250 | 1E-03 | |
| Volume resistivity | IEC 60093 | 4E+16 ohms·cm | |
| ASTM D257/IEC 60093 | 4.0 x 10^16 Ω.cm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.66 | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.040 % |
| ASTM D570/ISO 62 | 0.01 % |
| Filling analysis | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| Melt viscosity | 310°C,1000sec^-1 | ISO 11443 | 240 Pa·s |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/1140A64 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |