plas
Log In

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 2034 SABIC INNOVATIVE NETHERLANDS
LEXAN™ 
Lighting applications,Plastic bag
Middle flow,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Ball Pressure TestH358/30ISO 2039-1100 Mpa
Rockwell hardnessR-SaleISO 2039-2120
thermal performanceTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Ball Pressure Test140°C9IEC 60695-10-2通过
125°CIEC 60695-10-2通过
Hot deformation temperature0.45MPa,Unannealed,100mmSpanISO 75-2/Be140 °C
1.8MPa,Unannealed,100mmSpanISO 75-2/Ae129 °C
Linear coefficient of thermal expansionMD:23to80°CISO 11359-27E-05 cm/cm/°C
RTIUL 74680.0 °C
RTI ElecUL 74680.0 °C
RTI ImpUL 74680.0 °C
thermal conductivityISO 83020.20 W/m/K
Vicat softening temperature--ISO 306/B120145 °C
--ISO 306/B50144 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Bending modulusISO 1782300 Mpa
bending strengthISO 17895.0 Mpa
Taber abraser1000Cycles,1000g,CS-17WheelInternal Method9.00 mg
Tensile modulusISO 527-2/12350 Mpa
Tensile strainBreakISO 527-2/50100 %
YieldISO 527-2/506.0 %
tensile strengthYieldISO 527-2/5065.0 Mpa
BreakISO 527-2/5070.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Dielectric strength3.20mm,in OilIEC 60243-117 KV/mm
1.60mm,in OilIEC 60243-127 KV/mm
0.800mm,in OilIEC 60243-135 KV/mm
Dissipation factor1MHzIEC 602500.010
50HzIEC 602501E-03
60HzIEC 602501E-03
Relative permittivity60HzIEC 602502.70
1MHzIEC 602502.70
50HzIEC 602502.70
Surface resistivityIEC 60093>1.0E+15 ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 11338.50 cm3/10min
Shrinkage rateMD3Internal Method0.40-0.60 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.13 %
Saturation,23°CISO 620.32 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Charpy Notched Impact Strength23°CISO 179/1eA9.0 kJ/m²
-30°CISO 179/1eA9.0 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/1A8.0 kJ/m²
23°CISO 180/1A8.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
23°CISO 179/1eU无断裂
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
23°CISO 180/1U无断裂
flammabilityTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Burning wire flammability index1.8mmIEC 60695-2-12960 °C
1.0mmIEC 60695-2-12850 °C
Extreme Oxygen IndexISO 4589-240 %
UL flame retardant rating2.5mmUL 94V-0
1.5mmUL 94V-2
optical performanceTest ConditionTest MethodSABIC INNOVATIVE NETHERLANDS/2034
Refractive indexISO 4891.586
transmissivity2540μmASTM D100388.0to90.0 %
turbidity2540μmASTM D1003<0.80 %