Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 S223-HG6U DSM HOLAND
Akulon®
--
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
| -30°C | ISO 179/1eA | 9.0 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 81 kJ/m² |
| -30°C | ISO 179/1eU | 65 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 9950 Mpa | |
| Tensile stress | 断裂 | ISO 527-2 | 200 Mpa |
| Bending stress | ISO 178 | 250 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 3.6 % |
| Flexural modulus | ISO 178 | 8400 Mpa |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| Dissipation Factor | 1 MHz | IEC 60250 | 0.016 |
| CTI | IEC 60112 | 500 V | |
| dielectric strength | IEC 60243-1 | 30 KV/mm | |
| 100 Hz | IEC 60250 | 3.80 | |
| Volume resistivity | IEC 60093 | 1.0E+14 ohms·cm | |
| Dissipation Factor | 100 Hz | IEC 60250 | 9.0E-3 |
| Surface Resistivity | IEC 60093 | -- ohms | |
| 1 MHz | IEC 60250 | 3.50 |
| flammability | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| Flammability level | 0.71 mm | IEC 60695-11-10, -20 | HB |
| 1.5 mm | IEC 60695-11-10, -20 | HB |
| physical property | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.6 % |
| density | ISO 1183 | 1.36 g/cm³ | |
| Shrinkage rate | 流量 | ISO 294-4 | 0.20 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 6.0 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 1.0 % |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/S223-HG6U |
|---|---|---|---|
| 0.45 MPa, 未退火 | ISO 75-2/B | 260 °C | |
| 流动 | ISO 11359-2 | 2.0E-5 cm/cm/°C | |
| 横向 | ISO 11359-2 | 7.0E-5 cm/cm/°C | |
| Melting temperature 3 | ISO 11357-3 | 260 °C | |
| 1.8 MPa, 未退火 | ISO 75-2/A | 250 °C |
Contact Us
Get App
Top