Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 HiFill® PA6/6 GF/M38 HS Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF/M38 HS |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 122 R |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF/M38 HS |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+13 Ω.cm | |
| dielectric strength | ASTM D149 | 15.7 KV/mm |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF/M38 HS |
|---|---|---|---|
| Flexural modulus | 悬壁梁缺口冲击强度 | ASTM D256 | 53.4 J/m |
| 悬壁梁无缺口冲击强度 | ASTM D256 | 747 J/m | |
| bending strength | 23°C | ASTM D790 | 186 MPa |
| Flexural modulus | 23°C | ASTM D790 | 6620 MPa |
| 屈服伸长率 | ASTM D638 | 4.0 % | |
| 拉伸强度 | ASTM D638 | 125 MPa |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF/M38 HS |
|---|---|---|---|
| Water absorption rate | (23°C,24hr) | ASTM D570 | 0.70 % |
| density | ASTM D792 | 1.45 g/cm³ | |
| Shrinkage rate | MD,3.17mm | ASTM D995 | 0.70 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF/M38 HS |
|---|---|---|---|
| Heat distortion temperature | 线膨胀系数，HDT | ASTM D696 | 2.16E-03 cm/cm／°C |
| 1.80MPa未退火，HDT | ASTM D648 | 235 °C | |
| 0.45MPa未退火，HDT | ASTM D648 | 255 °C |
Contact Us
Get App
Top