Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM KA000 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Automotive Applications
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/KA000 |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa,Unannealed,64 mmSpan1.8 MPa,Unannealed,64.0 mm Span6 | ISO 75-2/Af | 135 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/KA000 |
|---|---|---|---|
| Bending modulus | ISO 178 | 2500 Mpa | |
| bending strength | ISO 178 | 64 Mpa | |
| Friction coefficient | 与自身 - 静态vs. Itself - Static | 0.21 | |
| 与自身 - 动态vs. Itself - Dynamic | 0.23 | ||
| Tensile strain | BreakBreak | ISO 527-2/5 | 8.8 % |
| tensile strength | BreakBreak | ISO 527-2/5 | 60 Mpa |
| Wear factor | WasherWasher | ASTM D3702 Modified | 8 10^-10 in^5-min/ft-lb-hr |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/KA000 |
|---|---|---|---|
| density | ISO 1183 | 1.37 g/cm³ | |
| Shrinkage rate | MDMD1 | Internal Method | 1.4 - 2.2 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/KA000 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃23℃4 | ISO 180-1A | 8 kJ/m² |
| Suspended wall beam without notch impact strength | 23℃23℃5 | ISO 180/1U | 45 kJ/m² |