Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC 3010-30 LG CHEM KOREA

LUPOY®

Thin walled components,Electrical field,Electronic field,Electrical appliances,Thin walled components,Electrical appliances,Electrical/Electronic Applications

High toughness,High impact resistance,High mobility,Good liquidity,Chemical resistance,heat-resisting,High transparency,Food contact compliance

Plastic Datasheets

hardness	Test Condition	Test Method	LG CHEM KOREA/3010-30
Rockwell hardness	M-Scale	ASTM D785	72
Rockwell hardness		R-Scale	ASTM D785	118

thermal performance	Test Condition	Test Method	LG CHEM KOREA/3010-30
Ball pressure temperature		IEC 60598-1	>125 °C
Hot deformation temperature	1.8MPa,Unannealed,4.00mm	ASTM D648	122 °C
		0.45MPa,Annealed,4.00mm	ASTM D648	139 °C
		1.8MPa,Annealed,4.00mm	ASTM D648	136 °C
Linear coefficient of thermal expansion	MD：-40to82°C	ASTM D696	6.8E-05 cm/cm/°C
Vicat softening temperature		ASTM D15259	144 °C

mechanical properties	Test Condition	Test Method	LG CHEM KOREA/3010-30
Bending modulus		ASTM D790	2400 Mpa
bending strength		ASTM D790	96.0 Mpa
elongation	Yield	ASTM D638	6.0 %
elongation		Break	ASTM D638	100 %
Tensile modulus		ASTM D638	2400 Mpa
tensile strength	Break	ASTM D638	60.0 Mpa
tensile strength		Yield,23°C5	ASTM D638	62.0 Mpa
Wear resistance	雾度变化	Kg/m	45 %

Electrical performance	Test Condition	Test Method	LG CHEM KOREA/3010-30
Compared to the anti leakage trace index	2.00mm	IEC 60112	PLC 2
Dielectric constant	60Hz	ASTM D150	3.00
Dielectric strength		ASTM D149	17 KV/mm
Dissipation factor	60Hz	ASTM D150	1E-03
Volume resistivity	23°C	ASTM D257	2E+17 ohms·cm

Physical properties	Test Condition	Test Method	LG CHEM KOREA/3010-30
melt mass-flow rate	300°C/1.2kg	ASTM D1238	30 g/10min
Shrinkage rate	MD	ASTM D955	0.50-0.70 %
Spiral flow length			3.20 CM
Water absorption rate	Equilibrium,23°C,50%RH	ASTM D570	0.32 %
Water absorption rate		23°C,24hr	ASTM D570	0.15 %

impact performance	Test Condition	Test Method	LG CHEM KOREA/3010-30
Dart impact	23°C,3.20mm,TotalEnergy	ASTM D3763	87.0 J
Impact strength of cantilever beam gap	23°C,3.20mm	ASTM D256	710 J/m
Suspended wall beam without notch impact strength	23°C	ASTM D256	无断裂

flammability	Test Condition	Test Method	LG CHEM KOREA/3010-30
Average degree of combustion		ASTM D635	3 CM
Extreme Oxygen Index		ASTM D2863	26 %
Hot filament ignition temperature	2.0mm	IEC 60695-2-13	850 °C
UL flame retardant rating	2.5mm	UL 94	V-2
		3.0mm	UL 94	V-2
		0.50mm	UL 94	V-2

optical performance	Test Method	LG CHEM KOREA/3010-30
Refractive index	ASTM D542	1.586
transmissivity	ASTM D1003	89.0 %
turbidity	ASTM D1003	0.70to1.5 %

Get App

Top