Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP A150 JAPAN POLYPLASTIC
LAPEROS®
Home appliance components,Electrical applications
enhance,Glass fiber reinforced,Flame retardant,Halogen-free
ULMSDS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
Rockwell hardness | M-Sale | ISO 2039-2 | 90 |
Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
ColourNumber | VF2001/BK210P |
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 240 °C |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
Bending modulus | ISO 178 | 20500 Mpa | |
ASTM D790/ISO 178 | 20500 kg/cm²(MPa)[Lb/in²] | ||
Bending strain | ISO 178 | 1.8 % | |
bending strength | ASTM D790/ISO 178 | 260 kg/cm²(MPa)[Lb/in²] | |
ISO 178 | 260 Mpa | ||
Charpy Notched Impact Strength | ASTM D256/ISO 179 | 12 kg·cm/cm(J/M)ft·lb/in | |
elongation | Break | ASTM D638 | 1.5 % |
tensile strength | ASTM D638/ISO 527 | 180 kg/cm²(MPa)[Lb/in²] | |
ASTM D638 | 180 Mpa |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
Dielectric constant | ASTM D150/IEC 60250 | 4.1 | |
Dielectric strength | 1.00mm | IEC 60243-1 | 44 KV/mm |
3.00mm | IEC 60243-1 | 28 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.020 |
耐电弧性 | IEC 60250 | 180 sec | |
1kHz | IEC 60250 | 0.020 | |
Relative permittivity | 1kHz | IEC 60250 | 4.50 |
1MHz | IEC 60250 | 4.10 | |
Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
other | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
characteristic | 玻璃纤维. 高刚性 | ||
Color | VF2001/BK210P |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.81 | |
Shrinkage rate | TD:1.00mm | Internal Method | 0.40 % |
MD:1.00mm | Internal Method | 0.11 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.020 % |
flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/A150 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |